Load data for .45 Glock Auto Pistol + .452 | 200gr | LOS SWC

Recommended Powder(s): Maxam CSB 2

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.452 \| 200gr \| LOS SWC
Bullet Weight:	200gr \| 13.0g
Bullet Diameter:	0.452" \| 11.48mm
Bullet Length:	0.614" \| 15.6mm
Caliber:	.45 Glock Auto Pistol load data
Case Length (l3):	0.759" \| 19.3mm
Cartridge Length (C.O.L.):	1.119" \| 28.4mm
Seated Depth:	0.254" \| 6.5mm
Shank Seated Depth:	0.254" \| 6.5mm
Case Capacity:	22.3 Grains of Water \| 1.45 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	18855 psi \| 1300 bar
LID:	LID_B3522_C733
Last updated:	2025-01-01

Load data for 46 loads in caliber .45 Glock Auto Pistol with .452 | 200gr | LOS SWC bullet and 23 powders such as Maxam CSB 2. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[Accurate No. 2]*	<<locked>>	65%	15447	82%	**3	86%
Accurate Solo 1250	<<locked>>	75%	16969	90%	**9	98%
Alliant UNIQUE	<<locked>>	74%	15925	84%	**9	91%
Baschieri & Pellagri 100	<<locked>>	65%	15389	82%	**3	99%
Hodgdon Universal	<<locked>>	65%	15664	83%	**2	97%
Lovex S020	<<locked>>	68%	15853	84%	**6	94%
Maxam CSB 1	<<locked>>	75%	16259	86%	**6	97%
Maxam CSB 2 👍	<<locked>>	76%	15302	81%	**2	100%
Maxam CSB 3	<<locked>>	70%	16592	88%	**9	100%
Maxam CSB 4	<<locked>>	67%	16708	89%	**9	100%
ReloadSwiss RS 12	<<locked>>	65%	15519	82%	**5	100%
ReloadSwiss RS 20	<<locked>>	77%	15461	82%	**2	93%
SNPE Vectan A0	<<locked>>	74%	16157	86%	**3	90%
SNPE Vectan BA 9	<<locked>>	64%	15490	82%	**3	94%
SNPE Vectan BA9 1/2	<<locked>>	69%	16476	87%	**9	97%
Somchem MP200	<<locked>>	68%	16491	87%	**2	90%
Somchem MS200	<<locked>>	70%	16317	87%	**6	92%
[Vihtavuori 3N37]*	<<locked>>	79%	16520	88%	**8	83%
Vihtavuori N320	<<locked>>	66%	16128	86%	**6	100%
Vihtavuori N32C Tin Star	<<locked>>	89%	15621	83%	**0	100%
Vihtavuori N330	<<locked>>	71%	15519	82%	**9	98%
Vihtavuori N340	<<locked>>	74%	16215	86%	**6	92%
[Vihtavuori N350]*	<<locked>>	80%	15780	84%	**2	82%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[Accurate No. 2]*	<<locked>>	61%	13576	72%	**7	84%
Accurate Solo 1250	<<locked>>	61%	11574	61%	**8	93%
[Alliant UNIQUE]*	<<locked>>	61%	11589	61%	**4	85%
Baschieri & Pellagri 100	<<locked>>	61%	13416	71%	**1	98%
Hodgdon Universal	<<locked>>	61%	13996	74%	**0	96%
Lovex S020	<<locked>>	60%	12604	67%	**3	90%
Maxam CSB 1	<<locked>>	61%	11284	60%	**1	92%
Maxam CSB 2	<<locked>>	62%	10544	56%	**1	97%
Maxam CSB 3	<<locked>>	60%	12836	68%	**1	98%
Maxam CSB 4	<<locked>>	62%	14663	78%	**3	100%
ReloadSwiss RS 12	<<locked>>	60%	13474	71%	**3	100%
[ReloadSwiss RS 20]*	<<locked>>	60%	10008	53%	**8	84%
[SNPE Vectan A0]*	<<locked>>	61%	11516	61%	**5	84%
SNPE Vectan BA 9	<<locked>>	60%	13779	73%	**4	93%
SNPE Vectan BA9 1/2	<<locked>>	60%	13097	69%	**7	94%
[Somchem MP200]*	<<locked>>	61%	13416	71%	**3	86%
[Somchem MS200]*	<<locked>>	62%	13039	69%	**4	89%
[Vihtavuori 3N37]*	<<locked>>	76%	14982	79%	**9	81%
Vihtavuori N320	<<locked>>	62%	13924	74%	**3	100%
Vihtavuori N32C Tin Star	<<locked>>	61%	8195	43%	**6	100%
Vihtavuori N330	<<locked>>	62%	12285	65%	**3	96%
[Vihtavuori N340]*	<<locked>>	61%	11603	62%	**7	86%
[Vihtavuori N350]*	<<locked>>	77%	14228	75%	**3	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data